Hayes has a long history with mountain bike brakes but has been relatively quiet over the last several years. Other brands have been pushing new product at a rapid pace, but there has still been plenty of room for improvement in terms of quality control and consistency. Hayes hasn’t been in hibernation by any means; instead, the company has been busy working on a new set of brakes that they hoped would prove to be reliable and consistent. Hayes sent us a pair of its new Dominion A4 brakes for a long-term review. After riding them through the hottest of summer days, we felt confident giving these brakes a solid verdict.
There is plenty of magic in the Dominion calipers, but the levers shouldn’t be overlooked. Aesthetically, the cylinders and levers have a burly look with some unique lines that make the brakes look somewhat modern. Inside the cylinders are glide rings to help keep the internal friction lower to allow for a smoother lever feel. Along with the glide rings are ball bearings at the lever blade pivot, adding to the smooth feel and actuation. There is also an easy-to-use reach adjustment to dial in the position of the lever.
The calipers and levers got some massive overhauls, but Hayes also developed an entirely new rotor around the new brakes. The rotors are 1.95mm thick and were designed specifically to cancel out any vibrations from the braking forces. The Dominion A4s have a retail price of $310 per side without rotors.
On the trail: We installed the Dominion A4 on the new Pivot Trail 429 that we have been riding for the last several months. The Dominions use a stiffer hose than other brands, but they’re not so stiff that it’s harder to route them through frames and such. With the hoses routed and the cylinders on the handlebars, we had the chance to use the Crosshair alignment on the caliper. The Crosshair alignment took all of the guesswork out of lining up the caliper with the rotor. We didn’t have any issues with the pads rubbing the rotor during our testing, due in large part to the Crosshair alignment.
Bleeding the pads to the rotors was what we expected. It required a few hard stops to get the brakes working at their full potential. It took us a little bit to get used to just how easy the lever throw and feel were. Compared to SRAM and Shimano levers that have a slightly more regressive feel, the Dominions were incredibly linear through the entire lever stroke with no spikes in pressure or feel. Even on long technical descents, the Dominion’s lever feel proved to be incredibly consistent. Most brakes have a very on/off feeling, but the Dominions offered plenty of modulation with plenty of power when gripped harder during emergencies or on more technical bits of trail.
We rode the Dominion brakes for almost four months with no issues. These brakes worked consistently and proved to be reliable. Hayes couldn’t have made a stronger statement with the Dominion A4 brakes.
• Broad range of adjustment
• Incredibly smooth lever feel
• Comfortable range of modulation
• Plenty of power